Polymerase chain reaction

'''Polymerase Chain Reaction''' (PCR) is a Nextel ringtones molecular biology/molecular biological technique for ''amplifying'' (creating multiple copies of) Abbey Diaz DNA without using a living Free ringtones organism, such as ''Majo Mills E. coli'' or Mosquito ringtone yeast. PCR is commonly used in medical and biological research labs for a variety of tasks, such as the detection of Sabrina Martins hereditary diseases, the identification of Nextel ringtones genetic fingerprints, the diagnosis of Abbey Diaz infectious diseases, the Free ringtones cloning of Majo Mills genes, and Cingular Ringtones paternity testing.

History

The basic method for performing PCR was invented by host ernie Kary Mullis, who was awarded the equipped for Nobel Prize in Chemistry in spirit with October trendy full 1993 for this achievement, only seven years after he first published his ideas. Mullis's idea was to develop a process by which DNA could be artificially multiplied through repeated cycles of duplication driven by an artistic treasures enzyme called raine review DNA polymerase.

''DNA polymerase'' occurs calif full naturally in living organisms, where it functions to duplicate DNA when ditch alongside cell (biology)/cells divide. It works by binding to a single DNA strand and creating the complementary strand. In Mullis's original PCR process, the a thing enzyme was used ''in vitro'' (in a controlled environment outside an organism). The double-stranded DNA was separated into two single strands by heating it to 96°C. At this temperature, however, DNA-Polymerase was destroyed so that the enzyme had to be replenished after the heating stage of each cycle. Mullis's original PCR process was very inefficient since it required a great deal of time, vast amounts of DNA-Polymerase, and continual attention throughout the PCR process.

Later, this original PCR process was improved by the use of DNA-Polymerase taken from ''thermophilic'' (heat-loving) bacteria that grow in in affected geysers at a temperature of over 110°C. The DNA-Polymerase taken from these organisms is ''thermostable'' (stable at high temperatures) and, when used in PCR, did not break down when the mixture was heated to separate the DNA strands. Since there was no longer a need to add new DNA-Polymerase for each cycle, the process of copying a given DNA strand could be simplified and automated.

One of the first thermostable DNA-Polymerases was obtained from ''updated answer Thermus aquaticus'' and called ''Taq.'' Taq polymerase is widely used in current PCR practice (May 2004). A disadvantage of Taq is that it sometimes makes mistakes when copying DNA, leading to ''background calling mutations'' (errors) in the DNA sequence, since it lacks 3'->5' proofreading exonuclease activity. Polymerases such as ''Pwo'' or ''Pfu,'' obtained from ''for gerardi Archaea,'' have ''proofreading mechanisms'' (mechanisms that check for errors) and can significantly reduce the number of mutations that occur in the copied DNA sequence. Combinations of both ''Taq'' and ''Pfu'' are available nowadays that provide both the high fidelity and accurate amplification of DNA

Patent wars

The PCR technique was patented by codify beck Cetus Corporation, where Mullis worked when he invented the technique. The Taq polymerase enzyme is also covered by patents. There have been several high-profile lawsuits related to the technique, including most famously a lawsuit brought by corporations after DuPont. The pharmaceutical company hair band Hoffmann-La Roche purchased the rights to the patents in from jurassic 1992 and currently holds them.

PCR in practice
mock superman image:Pcr_machine.jpg/thumb/200px/'''Figure 1''': PCR machine
PCR is used to amplify a short, well-defined part of a DNA strand. This can be a single gene, or just a part of a gene. As opposed to living organisms, the PCR process can copy only short DNA fragments, usually up to 10 kb (kb=kilo base pairs=1000 base pairs). DNA is double-stranded, and therefore, it is measured in complementary DNA building blocks (nucleic acids) called ''pat who base pairs.'' Certain methods can copy fragments up to 40 kb in size, which is still much less than the chromosomal DNA of a ''by fashion Eukaryote/eukaryotic cell''for example, a human cell contains about three billion base pairs.

PCR, as currently practiced, requires several basic components. These components are:

* ''DNA template,'' which contains the region of the DNA fragment to be amplified
* Two ''primers,'' which determine the beginning and end of the region to be amplified (see following section on primers)
* DNA-Polymerase, which copies the region to be amplified
* ''Nucleotides,'' from which the DNA-Polymerase builds the new DNA
* ''Buffer,'' which provides a suitable chemical environment for the DNA-Polymerase

The PCR reaction is carried out in a Thermal cycler/thermal cycler. This is a machine that heats and cools the reaction tubes within it to the precise temperature required for each step of the reaction. To prevent evaporation of the reaction mixture, a heated lid is placed on top of the reaction tubes or a layer of oil is put on the surface of the reaction mixture. These machines cost in the order
of USD 2,500 in 2004.

= Primers =

The DNA fragment to be amplified is determined by selecting primers. Primers are short, artificial DNA strandsnot more than fifty (usually 18-25 bp) nucleotides that exactly match the beginning and end of the DNA fragment to be amplified. They ''anneal'' (adhere) to the DNA template at these starting and ending points, where the DNA-Polymerase binds and begins the synthesis of the new DNA strand.

The choice of the length of the primers and their melting temperature (Tm) depends on a number of considerations. The melting temperature of a primernot to be confused with the melting temperature of the DNA in the first step of the PCR processis defined as the temperature below which the primer will anneal to the DNA template and above which the primer will ''dissociate'' (break apart) from the DNA template. The melting temperature increases with the length of the primer. Primers that are too short would anneal at several positions on a long DNA template, which would result in non-specific copies. On
the other hand, the length of a primer is limited by the temperature required to melt it. Melting temperatures that are too high, i.e., above 80°C, can also cause problems since the DNA-Polymerase is less active at such temperatures. The optimum length of a primer is generally from twenty to forty nucleotides with a melting temperature between 60°C and 75°C.

Sometimes ''degenerate primers'' are used. These are actually mixtures of similar, but not identical, primers. They may be convenient if the same gene is to be amplified from different organisms, as the genes themselves are probably similar but not identical. The other use for degenerate primers is when primer design is based on protein sequence. As several different codons can code for one amino acid, it is often difficult to deduce which codon is used in a particular case. Therefore primer sequence corresponding to the amino acid isoleucine might be "ATH", where A stands for adenine, T for thymine, and H for adenine, thymine, or cytosine. (See genetic code for further details about codons) Use of degenerate primers can greatly reduce the specificity of the PCR amplification. The problem can be partly solved by using touchdown PCR.

Above mentioned considerations makes primer design very accurate process, on which depends product yield:
* GC-content should be between 40-60.
* Calculated Tm for both primers used in reaction should not differ >5°C and Tm of the amplification product should not differ from primers by >10°C.
* Annealing temperature usually is -5°C the calculated lower Tm. However it should be chosen empirically for individual conditions.
* Inner self-complementary hairpins of >4 and of dimers >8 should be avoided.
* 3' terminus is extremely case sensitive - it must not be complementary to any region of the other primer used in the reaction and must provide correct base matching to template.

There are programs to help design primers (see #External links/External links).

= Procedure =

The PCR process consists of a series of twenty to thirty cycles. Each cycle consists of three steps (Fig. 2).

(1) The double-stranded DNA has to be heated to 94-96°C in order to separate the strands. This step is called ''denaturing;'' it breaks apart the hydrogen bonds that connect the two DNA
strands. Prior to the first cycle, the DNA is often denatured for an extended time to ensure that both the template DNA and the primers have completely separated and are now single-strand only. Time: 1-2 minutes.

(2) After separating the DNA strands, the temperature is lowered so the primers can attach themselves to the single DNA strands. This step is called ''annealing.'' The temperature of this stage depends on the primers and is usually 5°C below their melting temperature (45-60°C). A wrong temperature
during the annealing step can result in primers not binding to the template DNA at all, or binding at random. Time: 1-2 minutes.

(3) Finally, the DNA-Polymerase has to fill in the missing strands. It starts at the annealed primer and works its way along the DNA strand. This step is called ''elongation.'' The elongation temperature depends on the DNA-Polymerase. The time for this step depends both on the DNA-Polymerase itself and on the length of the DNA fragment to be amplified. As a rule-of-thumb, 1 minute per 1000bp.

image:pcr.png/frame/none/'''Figure 2''': Schematic drawing of the PCR cycle. (1) Denaturing at 96°C. (2) Annealing at 68°C. (3) Elongation at 72°C (P=Polymerase). (4) The first cycle is complete. The two resulting DNA strands make up the template DNA for the next cycle, thus doubling the amount of DNA duplicated for each new cycle.

= Example =
The times and temperatures given in this example are taken from a PCR program that was successfully used on a 250 bp fragment of the C-terminus of the ''insulin-like growth factor (IGF).''

The reaction mixture consists of :

* 1.0 µl DNA template (100 ng/µl)
* 2.5 µl of primer, 1.25 µl per primer (100 ng/µl)
* 1.0 µl Pfu-Polymerase
* 1.0 µl nucleotides
* 5.0 µl buffer
*89.5 µl H2O

A 200 µl reaction tube containing the 100 µl mixture is inserted into the thermocycler.

The PCR process consists of the following steps:

;Step 1: Initialization. Heat the mixture at 96°C for 5 minutes to ensure that the DNA strands as well as the primers have melted. The DNA-Polymerase can be present at initialization, or it can be added after this step.
;Step 2: Melting. Heat at 96°C for 30 seconds. For each cycle, this is usually enough time for the DNA to melt.
;Step 3: Annealing. Heat at 68°C for 30 seconds.
;Step 4: Elongation. Heat at 72°C for 45 seconds.
;Step 5: Steps 2-4 are repeated 25 times, but with good primers and fresh polymerase, 15 to 20 cycles is sufficient.
;Step 6: Hold mixture at 7°C. This is useful if one starts the PCR in the evening just before leaving the lab, so it can run overnight. The DNA will not be damaged at 7°C after just one night.

image:pcr_gel.png/thumb/right/200px/'''Figure 3''': PCR product compared with DNA ladder in agarose gel. DNA ladder (lane 1), the PCR product in low concentration (lane 2), and high concentration (lane 3). Image published with permission of Helmut W. Klein, Institute of Biochemistry, University of Cologne, Germany

The PCR product can be identified by its size using agarose gel electrophoresis. Agarose gel electrophoresis is a procedure that consists of injecting DNA into agarose gel and then applying an electric current to the gel. As a result, the smaller DNA strands move faster than the larger strands through the gel toward the positive current. The size of the PCR product can be determined by comparing it with a ''DNA ladder'', which contains DNA fragments of known size, also within the gel (Fig. 3).

= PCR optimization=

Since PCR is very sensitive, adequate measures to avoid contamination from other DNA present in lab environment (bacteria, viruses, own DNA etc.) should be taken. Thus DNA sample preparation, reaction mixture assemblage and the PCR process, in addition to the subsequent reaction product analysis, should be performed in separate areas. For the preparation of reaction mixture, a laminar flow cabinet with UV lamp is recommended. Fresh gloves should be used for each PCR step as well as displacement pipettes with aerosol filters.
The reagents for PCR should be prepared separately and used solely for this purpose. Aliquots should be stored separately from other DNA samples. A control reaction (inner control), omitting template DNA, should always be performed, to confirm the absence of contamination.

= Recent developments in PCR techniques=
*A more recent method which excludes a temperature cycle, but uses enzymes, is helicase-dependent amplification.
*A style of PCR that reduces nonspecific primer annealing is Touchdown PCR.
*Real-Time PCR is a quantative PCR technique.

Uses of PCR

PCR can be used for a broad variety of experiments and analyzes. Some examples are discussed below.

= Genetic fingerprinting =
Genetic fingerprinting is a forensic technique used to identify a person by comparing his or her DNA with a given sample, e.g., blood from a crime scene can be genetically compared to blood from a suspect. The sample may contain only a tiny amount of DNA, obtained from a source such as blood, semen, saliva, hair, etc. Theoretically, just a single strand is needed. First, one breaks the DNA sample into fragments, then amplifies them using PCR. The amplified fragments are then separated using gel electrophoresis. The overall layout of the DNA fragments is called a '' DNA fingerprint''.

= Paternity testing =
image:pcr_fingerprint.png/thumb/200px/'''Figure 4''': Electrophoresis of PCR-amplified DNA fragments. (1) Father. (2) Child. (3) Mother. The child has inherited some, but not all of the fingerprint of each of its parents, giving it a new, unique fingerprint.

Although these resulting 'fingerprints' are unique (except for identical twins), genetic relationships, for example, parent-child or siblings, can be determined from two or more genetic fingerprints, which can be used for paternity tests (Fig. 4). A variation of this technique can also be used to determine evolutionary relationships between organisms.

= Detection of hereditary diseases =
The detection of hereditary diseases in a given genome is a long and difficult process, which can be shortened significantly by using PCR. Each gene in question can easily be amplified through PCR by using the appropriate primers and then sequencing/sequenced to detect mutations.

Viral diseases, too, can be detected using PCR through amplification of the viral DNA. This analysis is possible right after infection, which can be from several days to several months before actual symptoms occur. Such early diagnoses give physicians a significant lead in treatment.

= Cloning genes =
Cloning a genenot to be confused with cloning a whole organismdescribes the process of isolating a gene from one organism and then inserting it into another organism. PCR is often used to amplify the gene, which can then be inserted into a vector (biology)/vector (a ''vector'' is a means of inserting a gene into an organism) such as a plasmid (a circular DNA molecule) (Fig. 5). The DNA can then be transferred into a different organism where the gene and its product can be studied more closely. Expressing a cloned gene (to ''express'' a gene means to produce the protein that it determines the production of) can also be a way of mass-producing useful proteinsfor example, medicines.

image:pcr_clone.png/frame/none/'''Figure 5''': Cloning a gene using a plasmid.(1) Chromosomal DNA of organism A. (2) PCR. (3) Multiple copies of a single gene from organism A. (4) Insertion of the gene into a plasmid. (5) Plasmid with gene from organism A. (6) Insertion of the plasmid in organism B. (7) Multiplication or expression of the gene, originally from organism A, occurring in organism B.

= Mutagenesis =
''Mutagenesis'' is a way of making changes to the sequence of nucleotides in the DNA. There are situations in which one is interested in ''mutated'' (changed) copies of a given DNA strand, for example, when trying to assess the function of a gene or in ''in-vitro'' protein evolution. Mutations can be introduced into copied DNA sequences in two fundamentally different ways in the PCR process. ''Site-directed mutagenesis'' allows the experimenter to introduce a mutation at a specific location on the DNA strand. Usually, the desired mutation is incorporated in the primers used for the PCR program. ''Random mutagenesis,'' on the other hand, is based on the use of error-prone polymerases in the PCR process. In the case of random mutagenesis, the location and nature of the mutations cannot be controlled. One application of random mutagenesis is to analyze structure-function relationships of a protein. By randomly altering a DNA sequence, one can compare the resulting protein with the original and determine the function of each part of the protein.

= Analysis of ancient DNA =
Using PCR, it becomes possible to analyze DNA that is thousands of years old. PCR techniques have been successfully used on animals, such as a forty-thousand-year-old mammoth, and also on human DNA, in applications ranging from the analysis of Egyptian mummy/mummies to the identification of a Russian tsar.

= Genotyping of specific mutations =
Through the use of allele-specific PCR, one can easily determine which allele of a mutation or polymorphism an individual has. Here, one of the two primers is common, and would anneal a short distance away from the mutation, while the other anneals right on the variation. The 3' end of the allele-specific primer is modified, to only anneal if it matches one of the alleles. If the mutation of interest is a T or C single nucleotide polymorphism (T/C SNP), one would use two reactions, one containing a primer ending in T, and the other ending in C. The common primer would be the same. Following PCR, these two sets of reactions would be run out on an agarose gel, and the band pattern will tell you if the individual is homozygous T, homozygous C, or heterzygous T/C. This methodology has several applications, such as amplifying certain haplotypes (when certain alleles at 2 or more SNPs occur together on the same chromosome [Linkage Disequilibrium]) or detection of recombinant chromosomes and the study of meiotic recombination.

= Comparison of gene expression =
Researchers have used traditional PCR as a way to estimate changes in the amount of a gene expression/gene's expression. Ribonucleic acid (RNA) is the molecule into which DNA is transcribed prior to making a protein, and those strands of RNA that hold the instructions for protein sequence are known as messenger RNA (mRNA). Once RNA is isolated it can be reverse transcriptase/reverse transcribed back into DNA (complementary DNA to be precise, known as cDNA), at which point traditional PCR can be applied to amplify the gene, this methodology is called RT-PCR. In most cases if there is more starting material (mRNA) of a gene then during PCR more copies of the gene will be generated. When the product of the PCR reaction are run on an agarose gel (see Figure 3 above) a band, corresponding to a gene, will appear larger on the gel (note that the band remains in the same location relative to the ladder, it will just appear fatter or brighter). By running samples of amplified cDNA from differently treated organisms one can get a general idea of which sample expressed more of the gene of interest. A quantative RT-PCR method has been developed, it is called Real-Time PCR.

External links
*http://www.hgmp.mrc.ac.uk/GenomeWeb/nuc-primer.html.

ca:PCR
de:Polymerase-Kettenreaktion
es:Reacción en cadena de la polimerasa
fr:Réaction en chaîne par polymérase
it:PCR
nl:Polymerase-kettingreactie
ja:PCR
pl:Reakcja łańcuchowa polimerazy
pt:PCR
sv:PCR
vi:PCR
zh:聚合酶鏈合反應

Tag: Molecular biology
Tag: Laboratory techniques
Tag: Amplifiers